merge

Learun.Application.Web/AppApi/PlotLayoutApiController.cs

@@ -160,6 +160,7 @@ namespace Learun.Application.Web.AppApi
 
                 res.Add(layoutTag);
             }
+            res = res.OrderByDescending(x => x.RoomNo).ToList();
             // 找出area和deck列组合重复的行
             var duplicateGroups = res
                 .GroupBy(r => new { r.area, r.deck, r.RoomNo })
@@ -179,7 +180,7 @@ namespace Learun.Application.Web.AppApi
             var validSystems = keyValue.Split(';').ToList();
             matchedTagIds = propAll.Where(item =>
             item.PropertyName == keyProp &&
-              validSystems.Any(prefix => item.PropertyValue == prefix) || validSystems.Any(prefix => item.PropertyValue.StartsWith(prefix + GlobalObject.enum_separator))
+              (validSystems.Any(prefix => item.PropertyValue == prefix) || validSystems.Any(prefix => item.PropertyValue.StartsWith(prefix + GlobalObject.enum_separator)))
             ).Select(X => X.EngineDataID).Distinct().ToList();
             //}
             //else
@@ -200,15 +201,22 @@ namespace Learun.Application.Web.AppApi
                 .ToList();
 
             //有效范围的设备的所有属性
-            var EquipPropAll = propAll.Where(x => matchedTags.Select(y => y.EngineDataID).Contains(x.EngineDataID)).ToList();
+            var EquipPropAll = propAll.Where(x => matchedTags.Select(y => y.EngineDataID).Contains(x.EngineDataID))
+                .Select(x=>new ec_enginedata_propertyEntity { 
+                    PropertyName=x.PropertyName,
+                    PropertyValue=x.PropertyValue,
+                    EngineDataID=x.EngineDataID,
+                    Marker = false
+                }).ToList();
             foreach (var basePoint in res)
             {
                 #region 每个基点关联的设备
                 //甲板 区域都和基点一致的设备
-                var DeckMatchedTagIds = EquipPropAll.Where(x => x.PropertyName == "甲板号" && (x.PropertyValue?.Split(new[] { "||" }, StringSplitOptions.None)[0] == basePoint.deck)).Select(X => X.EngineDataID).ToList();
+                var DeckMatchedTagIds = EquipPropAll.Where(x => x.PropertyName == "甲板号" && (x.PropertyValue?.Split(new[] { "||" }, StringSplitOptions.None)[0] == basePoint.deck) && x.Marker==false).Select(X => X.EngineDataID).ToList();
                 //var AreaMatchedTagIds = EquipPropAll.Where(x => x.PropertyName == "区域" && x.PropertyValue == basePoint.area).Select(X => X.EngineDataID).ToList();
                 //#task 9542
                 var matchPointTagIds = DeckMatchedTagIds;//.Intersect(AreaMatchedTagIds).ToList();
+                var matchPointTagIdSet = new System.Collections.Generic.HashSet<string>(matchPointTagIds);
 
                 foreach (var matchPointTagId in matchPointTagIds)
                 {
@@ -225,7 +233,7 @@ namespace Learun.Application.Web.AppApi
                         Prop_RoomNo = Prop_RoomNo.Split(new string[] { GlobalObject.enum_separator }, StringSplitOptions.None)[0];//插件端对于下拉列表 都是 name || nameEN
                     }
                     var matchedFrame = frameLists.FirstOrDefault(X => X.Num == Prop_Frame);
-                    var matchedRoom = roomLists.FirstOrDefault(x => x.DataItemName == Prop_RoomNo);
+                    var matchedRoom = roomLists.FirstOrDefault(x => x.DataItemName == Prop_RoomNo || x.DataItemName+" "+ x.DataItemNameEN==Prop_RoomNo);
                     if (matchedFrame == null && matchedRoom == null)
                     {
                         var layoutTagInfoInvalid = new layoutTagInfoBrief()
@@ -236,6 +244,11 @@ namespace Learun.Application.Web.AppApi
                             area = "ERR",
                         };
                         basePoint.Tags.Add(layoutTagInfoInvalid);
+                        foreach (var item in EquipPropAll)
+                        {
+                            if (matchPointTagIdSet.Contains(item.EngineDataID))
+                                item.Marker = true;
+                        }
                         continue;
                     }
                     double xValue = 0;
@@ -352,6 +365,11 @@ namespace Learun.Application.Web.AppApi
                         RoomNo = strRoom
                     };
                     basePoint.Tags.Add(layoutTagInfo);
+                    foreach (var item in EquipPropAll)
+                    {
+                        if (matchPointTagIdSet.Contains(item.EngineDataID))
+                            item.Marker = true;
+                    }
                 }
                 #endregion
             }

Learun.Application.Web/Areas/ZZDT_EC/Controllers/ec_report_fileController.cs

@@ -1,4 +1,5 @@
-using DocumentFormat.OpenXml.Bibliography;
+using ClosedXML.Excel;
+using DocumentFormat.OpenXml.Bibliography;
 using DocumentFormat.OpenXml.Drawing.Charts;
 using DocumentFormat.OpenXml.ExtendedProperties;
 using DocumentFormat.OpenXml.Spreadsheet;
@@ -1311,6 +1312,9 @@ namespace Learun.Application.Web.Areas.ZZDT_EC.Controllers
                                     }
                                     #endregion
                                     break;
+                                case "电缆册":
+                                    CreateReportForCableOfDivision2(paramObj, workbook, ProjectId);
+                                    break;
                                 case "云线备注清单":
                                     #region 云线备注清单 
                                     int SelectModel;
@@ -2007,6 +2011,499 @@ namespace Learun.Application.Web.Areas.ZZDT_EC.Controllers
             return DetailName.Substring(0, index);
         }
 
+        /// <summary>
+        /// 专门帮2室做的电缆册抽取
+        /// </summary>
+        /// <param name="paramObj"></param>
+        /// <param name="workbook"></param>
+        /// <param name="ProjectId"></param>
+        public void CreateReportForCableOfDivision2(JObject paramObj, IWorkbook workbook, string ProjectId)
+        {
+            try
+            {
+                string dataItemDetailIDOrDwgCategoryID; int model;
+                dataItemDetailIDOrDwgCategoryID = paramObj.Value<string>("dataItemDetailIDOrDrawingCategoryID");// paramObj["dataItemDetailIDOrDwgCategoryID"].ToString();
+                model = paramObj.Value<int>("model");
+
+
+                ISheet sheetCable = workbook.CreateSheet("电缆清册");
+                ISheet sheetCable2 = workbook.CreateSheet("电缆清册(双星)");
+                #region 表头部分
+                IRow rowCable = sheetCable.CreateRow(0);
+                rowCable.CreateCell(0).SetCellValue("所属系统");
+                rowCable.CreateCell(1).SetCellValue("电缆编号");
+                rowCable.CreateCell(2).SetCellValue("电缆类型");
+                rowCable.CreateCell(3).SetCellValue("电缆规格");
+                rowCable.CreateCell(4).SetCellValue("起始设备代码");
+                rowCable.CreateCell(5).SetCellValue("起始" + "\n" + "FrDeck");
+                rowCable.CreateCell(6).SetCellValue("设备位置" + "\n" + "FrRoom");
+                rowCable.CreateCell(7).SetCellValue("设备名称" + "\n" + "FrEquip");
+                rowCable.CreateCell(8).SetCellValue("终止设备代码");
+                rowCable.CreateCell(9).SetCellValue("终止" + "\n" + "ToDeck");
+                rowCable.CreateCell(10).SetCellValue("设备位置" + "\n" + "ToRoom");
+                rowCable.CreateCell(11).SetCellValue("设备名称" + "\n" + "ToEquip");
+                rowCable.CreateCell(12).SetCellValue("是否变频");
+                rowCable.CreateCell(13).SetCellValue("是否本安");
+                rowCable.CreateCell(14).SetCellValue("是否独立屏蔽");
+                rowCable.CreateCell(15).SetCellValue("是否防火");
+                rowCable.CreateCell(16).SetCellValue("是否铠装");
+
+                IRow rowCable2 = sheetCable2.CreateRow(0);
+                rowCable2.CreateCell(0).SetCellValue("所属系统");
+                rowCable2.CreateCell(1).SetCellValue("电缆编号");
+                rowCable2.CreateCell(2).SetCellValue("电缆类型");
+                rowCable2.CreateCell(3).SetCellValue("电缆规格");
+                rowCable2.CreateCell(4).SetCellValue("起始设备代码");
+                rowCable2.CreateCell(5).SetCellValue("起始" + "\n" + "FrDeck");
+                rowCable2.CreateCell(6).SetCellValue("设备位置" + "\n" + "FrRoom");
+                rowCable2.CreateCell(7).SetCellValue("设备名称" + "\n" + "FrEquip");
+                rowCable2.CreateCell(8).SetCellValue("终止设备代码");
+                rowCable2.CreateCell(9).SetCellValue("终止" + "\n" + "ToDeck");
+                rowCable2.CreateCell(10).SetCellValue("设备位置" + "\n" + "ToRoom");
+                rowCable2.CreateCell(11).SetCellValue("设备名称" + "\n" + "ToEquip");
+                rowCable2.CreateCell(12).SetCellValue("是否变频");
+                rowCable2.CreateCell(13).SetCellValue("是否本安");
+                rowCable2.CreateCell(14).SetCellValue("是否独立屏蔽");
+                rowCable2.CreateCell(15).SetCellValue("是否防火");
+                rowCable2.CreateCell(16).SetCellValue("是否铠装");
+                #endregion
+                #region 表名区
+                var enginedataTableName = ProjectSugar.TableName<ec_enginedataEntity>(ProjectId);
+                var objectTypeTableName = ProjectSugar.TableName<ec_objecttypeEntity>(ProjectId);
+                var relTypeTableName = ProjectSugar.TableName<ec_reltypeEntity>(ProjectId);
+                var PropertyTableName = ProjectSugar.TableName<ec_propertyEntity>(ProjectId);
+                var DataItemTableName = ProjectSugar.TableName<ec_dataitemEntity>(ProjectId);
+                var DataItemDetailTableName = ProjectSugar.TableName<ec_dataitemdetailEntity>(ProjectId);
+                var relTableName = ProjectSugar.TableName<ec_enginedata_relEntity>(ProjectId);
+                var propertyTableName = ProjectSugar.TableName<ec_enginedata_propertyEntity>(ProjectId);
+                var pixelTableName = ProjectSugar.TableName<ec_enginedata_pixelEntity>(ProjectId);
+                var dwgTableName = ProjectSugar.TableName<ec_drawing_fileEntity>(ProjectId);
+                var dwgCategoryTableName = ProjectSugar.TableName<ec_drawing_catalogueEntity>(ProjectId);
+                #endregion
+                #region 数据查询区，避免循环里查询
+                var pixels = SqlSugarHelper.Db.Queryable<ec_enginedata_pixelEntity>().AS(pixelTableName).Distinct().ToList();
+                pixels = pixels.Where(x => x.DeleteFlg != 1).ToList();
+                var dwgCategory = SqlSugarHelper.Db.Queryable<ec_drawing_catalogueEntity>().AS(dwgCategoryTableName).Distinct().ToList();
+
+                var allDwgs = SqlSugarHelper.Db.Queryable<ec_drawing_fileEntity>().AS(dwgTableName).ToList();
+                //var allProps = SqlSugarHelper.Db.Queryable<ec_enginedata_propertyEntity>().AS(propertyTableName).ToList();
+                var DeckProp = SqlSugarHelper.Db.Queryable<ec_propertyEntity>().AS(PropertyTableName).First(x => x.PropertyName == "甲板号");
+                List<ec_dataitemdetailEntity> allDecks = new List<ec_dataitemdetailEntity>();
+                List<ec_dataitemdetailEntity> allSystems = new List<ec_dataitemdetailEntity>();
+                List<string> validSystemIds = new List<string>(); // dataItemDetailID 以及 其下面所有的
+                if (DeckProp != null)
+                {
+                    var DeckEnumList = SqlSugarHelper.Db.Queryable<ec_dataitemEntity>().AS(DataItemTableName).First(x => x.DataItemName == DeckProp.EnumData);
+                    if (DeckEnumList != null)
+                    {
+                        allDecks = SqlSugarHelper.Db.Queryable<ec_dataitemdetailEntity>().AS(DataItemDetailTableName).Where(x => x.DataItemID == DeckEnumList.DataItemID).ToList();
+                    }
+                }
+                var SystemEnumList = SqlSugarHelper.Db.Queryable<ec_dataitemEntity>().AS(DataItemTableName).First(x => x.DataItemCode == GlobalObject.enumlist_System);
+                if (SystemEnumList != null)
+                {
+                    allSystems = SqlSugarHelper.Db.Queryable<ec_dataitemdetailEntity>().AS(DataItemDetailTableName).Where(x => x.DataItemID == SystemEnumList.DataItemID).ToList();
+
+
+                }
+                var needPropsName = new List<string>() {
+                                        GlobalObject.propName_System, GlobalObject.propName_CableSpec,
+                                    "变频电缆","本安电缆","是否独立屏蔽","是否防火","是否铠装","电缆供货类型","平行电缆",
+"甲板号","房间号","中文名称",GlobalObject.propName_Frame, GlobalObject.propName_cableTypeTest};
+                var allprops = SqlSugarHelper.Db.Queryable<ec_enginedata_propertyEntity>().AS(propertyTableName).
+                    Where(x => needPropsName.Contains(x.PropertyName)).
+                    ToList();
+
+                switch (model)
+                {
+                    case 0:
+                        break;
+                    case 1://按系统
+                        validSystemIds = new ec_dataitemBLL().GetChildNodes(ProjectId, dataItemDetailIDOrDwgCategoryID); break;
+                    case 2://按图纸（可能选的是目录，也可能选的是图纸）
+                        var folder = dwgCategory.FirstOrDefault(x => x.DrawingCatalogueID == dataItemDetailIDOrDwgCategoryID);
+                        if (folder != null)
+                        {
+                            //选的是目录
+                            validSystemIds = new ec_drawing_catalogueBLL().GetChildNodes(ProjectId, dataItemDetailIDOrDwgCategoryID); break;
+                        }
+                        else
+                        {
+                            var dwg = allDwgs.FirstOrDefault(x => x.DrawingFileID == dataItemDetailIDOrDwgCategoryID);
+                            if (dwg != null)
+                            {
+                                //选的是文件
+                                validSystemIds.Add(dwg.DrawingFileID);
+                            }
+                            else
+                            {
+                                //ID 有些问题
+                            }
+                        }
+                        break;
+                    default:
+                        break;
+                }
+
+                var cableFromToRel = SqlSugarHelper.Db.Queryable<ec_reltypeEntity>().AS(relTypeTableName).ToList().FirstOrDefault(x => x.RelType == enum_RelType.设备_电缆);
+                if (cableFromToRel == null)
+                {
+                    throw new Exception($"查不到【{enum_RelType.设备_电缆.ToString()}】这个关联类型。");
+                }
+                var relDatas = SqlSugarHelper.Db.Queryable<ec_enginedata_relEntity>().AS(relTableName)
+                    .LeftJoin<ec_enginedataEntity>((eere, eede1) => eere.RelEngineData1ID == eede1.EngineDataID).AS<ec_enginedataEntity>(enginedataTableName)
+                    .LeftJoin<ec_objecttypeEntity>((eere, eede1, eote1) => eede1.ObjectTypeID == eote1.ObjectTypeID).AS<ec_objecttypeEntity>(objectTypeTableName)
+                    .LeftJoin<ec_enginedataEntity2>((eere, eede1, eote1, eede2) => eere.RelEngineData2ID == eede2.EngineDataID).AS<ec_enginedataEntity2>(enginedataTableName)
+                    .LeftJoin<ec_objecttypeEntity2>((eere, eede1, eote1, eede2, eote2) => eede2.ObjectTypeID == eote2.ObjectTypeID).AS<ec_objecttypeEntity2>(objectTypeTableName)
+                    .Where((eere, eede1, eote1, eede2, eote2) => eere.RelTypeID == cableFromToRel.RelTypeID)
+                    .Select((eere, eede1, eote1, eede2, eote2) => new {
+                        eere.EngineDataRelID,
+                        eere.RelTypeID,
+                        eere.RelEngineData1ID,
+                        RelEngDataObjType1 = eote1.ObjectTypeName,
+                        eere.RelEngineData2ID,
+                        RelEngDataObjType2 = eote2.ObjectTypeName,
+                        eere.OPCPixel
+                    })
+                    .ToList();
+                var cables = SqlSugarHelper.Db.Queryable<ec_enginedataEntity>().AS(enginedataTableName)
+                                     .InnerJoin<ec_objecttypeEntity>((a, b) => a.ObjectTypeID == b.ObjectTypeID).AS<ec_objecttypeEntity>(objectTypeTableName)
+                                     .InnerJoin<ec_enginedata_pixelEntity>((a, b, c) => a.EngineDataID == c.EngineDataID).AS<ec_enginedata_pixelEntity>(pixelTableName)
+                                     .Where((a, b, c) =>
+                                        b.ObjectTypeName.EndsWith("电缆") &&
+                                        !string.IsNullOrEmpty(a.TagNumber) &&
+                                        c.DeleteFlg != 1)
+                                     .OrderBy((a, b) => a.TagNumber)
+                                     .Select((a, b, c) => new ec_enginedataEntity
+                                     {
+                                         CaseID = a.CaseID,
+                                         EngineDataID = a.EngineDataID,
+                                         TagNumber = a.TagNumber,
+                                         ObjectTypeID = a.ObjectTypeID,
+                                         ObjectTypeName = b.ObjectTypeName,
+                                         DataStatus = a.DataStatus
+                                     })
+                                     .Distinct()
+                                     .ToList();
+
+                //24 4 2，过滤掉图面上不存在的
+
+                var Equips = SqlSugarHelper.Db.Queryable<ec_enginedataEntity>().AS(enginedataTableName)
+                                     .InnerJoin<ec_objecttypeEntity>((a, b) => a.ObjectTypeID == b.ObjectTypeID).AS<ec_objecttypeEntity>(objectTypeTableName)
+                                     .Where((a, b) => !b.ObjectTypeName.EndsWith("电缆"))
+                                     .OrderBy((a, b) => a.TagNumber)
+                                     .ToList();
+                #endregion
+                int curRow = 1;
+                //对电缆编号排序
+                cables.Sort((x, y) => CommonHelper.Compare(x.TagNumber, y.TagNumber));
+
+                foreach (var cable in cables) //Where(x => x.TagNumber == "TEST-CABLE-001" || x.TagNumber == "1L11-7")
+                {
+                    try
+                    {
+
+                        bool RoutingType = false;//true时，代表**，会出现在第二个sheet里
+                        rowCable = sheetCable.CreateRow(curRow++);
+                        rowCable.CreateCell(0).SetCellValue("");
+                        rowCable.CreateCell(1).SetCellValue("");
+                        rowCable.CreateCell(2).SetCellValue("");
+                        rowCable.CreateCell(3).SetCellValue("");
+                        rowCable.CreateCell(4).SetCellValue("");
+                        rowCable.CreateCell(5).SetCellValue("");
+                        rowCable.CreateCell(6).SetCellValue("");
+                        rowCable.CreateCell(7).SetCellValue("");
+                        rowCable.CreateCell(8).SetCellValue("");
+                        rowCable.CreateCell(9).SetCellValue("");
+                        rowCable.CreateCell(10).SetCellValue("");
+                        rowCable.CreateCell(11).SetCellValue("");
+                        rowCable.CreateCell(12).SetCellValue("");
+                        rowCable.CreateCell(13).SetCellValue("");
+                        rowCable.CreateCell(14).SetCellValue("");
+                        rowCable.CreateCell(15).SetCellValue("");
+                        rowCable.CreateCell(16).SetCellValue("");
+                        rowCable.CreateCell(17).SetCellValue("");
+                        //rowCable.CreateCell(18).SetCellValue("");
+
+                        //25 02 28，优化速速，估注释，搬到循环外
+                        var TagProps = allprops.Where(x => x.EngineDataID == cable.EngineDataID)//&& (x.CaseID == "0" || string.IsNullOrEmpty(x.CaseID))
+                            .ToList();//位号的所有属性
+                        var PropValue = "";
+
+
+
+
+                        #region 所属系统
+                        var TagProp = TagProps.Where(x => x.PropertyName == GlobalObject.propName_System && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        PropValue = GetNameBeforeDoublePipe(PropValue);//双||的事情
+
+                        if (!TagInRange(model, PropValue, cable, validSystemIds, ref pixels, ref allDwgs, ref allSystems))
+                        {
+                            curRow--;
+                            continue;
+                        } //判断是否在范围内
+
+                        if (!string.IsNullOrEmpty(PropValue) && Regex.IsMatch(PropValue, "^[A-Za-z0-9]*$") && allSystems.Any(x => x.DataItemName == PropValue))
+                        {
+                            //换成枚举的描述
+                            PropValue = allSystems.FirstOrDefault(x => x.DataItemName == PropValue).DataItemCode;
+                        }
+                        rowCable.Cells[0].SetCellValue(PropValue);//感觉这里保持默认好点
+                        #endregion
+                        #region 位号
+                        rowCable.Cells[1].SetCellValue(cable.TagNumber);
+                        if (cable.TagNumber.Contains("**"))
+                        {
+                            RoutingType = true;
+                        }
+                        #endregion
+                        TagProp = TagProps.Where(x => x.PropertyName == GlobalObject.propName_cableTypeTest && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[2].SetCellValue(PropValue);//电缆类型，信号、电力、本安、动力、随机
+                        #region 电缆规格
+                        TagProp = TagProps.Where(x => x.PropertyName == GlobalObject.propName_CableSpec && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[3].SetCellValue(PropValue);
+
+                        #endregion
+                        #region 电缆型号（CJ86）
+                        TagProp = TagProps.Where(x => x.PropertyName == "变频电缆" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[12].SetCellValue(PropValue);
+
+                        TagProp = TagProps.Where(x => x.PropertyName == "本安电缆" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[13].SetCellValue(PropValue);
+                        
+                        TagProp = TagProps.Where(x => x.PropertyName == "是否独立屏蔽" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[14].SetCellValue(PropValue);
+
+                        TagProp = TagProps.Where(x => x.PropertyName == "是否防火" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[15].SetCellValue(PropValue);
+                        
+                        TagProp = TagProps.Where(x => x.PropertyName == "是否铠装" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        rowCable.Cells[16].SetCellValue(PropValue);
+
+
+
+                    #endregion
+                    xxx:
+                        #region 供货范围
+                        //TagProp = TagProps.Where(x => x.PropertyName == "电缆供货类型" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                        //PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                        //if (PropValue.Contains("**"))
+                        //{
+                        //    RoutingType = true;
+                        //}
+                        //else if (PropValue.Contains("*"))
+                        //{
+                        //    rowCable.Cells[2].SetCellValue("A");//电缆类型，信号、电力、本安、动力、随机
+                        //}
+                        //else
+                        //{
+                        //    //根据前面的 CableTypeEnum 来
+                        //}
+                        #endregion
+                        //电缆的from to是根据甲板号的order顺序来的，高优先级的就属于from
+                        int? FromOrder = -1; int? ToOrder = -1;
+                        #region From
+                        var cableFromId = relDatas?.FirstOrDefault(x => x?.RelEngineData2ID == cable?.EngineDataID && x?.RelEngDataObjType1?.Contains(GlobalObject.objectType_OPC) == false)?.RelEngineData1ID;
+                        if (!string.IsNullOrEmpty(cableFromId))
+                        {
+                            var cableFromObj = Equips.FirstOrDefault(x => x.EngineDataID == cableFromId);
+                            if (cableFromObj != null)
+                            {
+                                var EquipFromProps = allprops.Where(x => x.EngineDataID == cableFromObj.EngineDataID)
+                                    .ToList();
+                                rowCable.Cells[4].SetCellValue(cableFromObj?.TagNumber);
+
+                                TagProp = EquipFromProps.Where(x => x.PropertyName == "甲板号" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                //转换
+                                if (!string.IsNullOrEmpty(PropValue))
+                                {
+                                    var frDeck = allDecks.FirstOrDefault(x => x.DataItemName == ec_dataitemService.GetNameBeforeDoublePipe(PropValue));
+                                    if (frDeck != null)
+                                    {
+                                        //找到匹配的enum，但是如果code为空，依旧使用自己原本的
+                                        PropValue = string.IsNullOrEmpty(frDeck.DataItemCode) ? PropValue : frDeck.DataItemCode;
+                                        FromOrder = frDeck.OrderID;
+                                    }
+
+                                }
+
+                                rowCable.Cells[5].SetCellValue(PropValue);//没找到依旧用自己原本的
+
+                                TagProp = EquipFromProps.Where(x => x.PropertyName == "房间号" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                if (string.IsNullOrEmpty(PropValue))
+                                {
+                                    //没房间号，取肋位号
+                                    TagProp = EquipFromProps.Where(x => x.PropertyName == GlobalObject.propName_Frame && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                    PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                }
+                                else
+                                {
+                                    //有房间号，取房间号
+                                }
+                                rowCable.Cells[6].SetCellValue(PropValue);
+
+
+                                TagProp = EquipFromProps.Where(x => x.PropertyName == "中文名称" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                rowCable.Cells[7].SetCellValue(PropValue);
+
+                            }
+
+                        }
+                        #endregion
+                        #region To
+                        var cableEndId = relDatas?.FirstOrDefault(x => x?.RelEngineData1ID == cable?.EngineDataID && x?.RelEngDataObjType2?.Contains(GlobalObject.objectType_OPC) == false)?.RelEngineData2ID;
+                        if (!string.IsNullOrEmpty(cableEndId))
+                        {
+                            var cableEndObj = Equips.FirstOrDefault(x => x.EngineDataID == cableEndId);
+                            if (cableEndObj != null)
+                            {
+                                var EquipToProps = allprops.Where(x => x.EngineDataID == cableEndObj.EngineDataID)
+                                    .ToList();
+                                rowCable.Cells[8].SetCellValue(cableEndObj?.TagNumber);
+
+
+                                TagProp = EquipToProps.Where(x => x.PropertyName == "甲板号" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                //转换
+                                if (!string.IsNullOrEmpty(PropValue))
+                                {
+                                    //目前属性寸的是name + || + nameEN，因为cad需要这样显示
+                                    //但是电缆表需要的是Code 
+                                    var ToDeck = allDecks.FirstOrDefault(x => x.DataItemName == ec_dataitemService.GetNameBeforeDoublePipe(PropValue));
+                                    if (ToDeck != null)
+                                    {
+                                        //找到匹配的enum，但是如果code为空，依旧使用自己原本的
+                                        PropValue = string.IsNullOrEmpty(ToDeck.DataItemCode) ? PropValue : ToDeck.DataItemCode;
+                                        ToOrder = ToDeck.OrderID;
+                                    }
+                                }
+
+                                rowCable.Cells[9].SetCellValue(PropValue);
+
+                                TagProp = EquipToProps.Where(x => x.PropertyName == "房间号" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                if (string.IsNullOrEmpty(PropValue))
+                                {
+                                    //没房间号，取肋位号
+                                    TagProp = EquipToProps.Where(x => x.PropertyName == GlobalObject.propName_Frame && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                    PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                }
+                                else
+                                {
+                                    //有房间号，取房间号
+                                }
+                                rowCable.Cells[10].SetCellValue(PropValue);
+
+
+                                TagProp = EquipToProps.Where(x => x.PropertyName == "中文名称" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                                PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                                rowCable.Cells[11].SetCellValue(PropValue);
+                            }
+
+                        }
+                        #endregion
+                        if (FromOrder != -1 && ToOrder != -1)
+                        {
+                            if (FromOrder > ToOrder)
+                            {
+                                //5678    9 10 11 12
+                                var tempTag = rowCable.Cells[4].StringCellValue;
+                                var tempDeck = rowCable.Cells[5].StringCellValue;
+                                var tempRoom = rowCable.Cells[6].StringCellValue;
+                                var tempName = rowCable.Cells[7].StringCellValue;
+
+                                rowCable.Cells[4].SetCellValue(rowCable.Cells[8].StringCellValue);
+
+                                rowCable.Cells[5].SetCellValue(rowCable.Cells[9].StringCellValue);
+
+                                rowCable.Cells[6].SetCellValue(rowCable.Cells[10].StringCellValue);
+
+                                rowCable.Cells[7].SetCellValue(rowCable.Cells[11].StringCellValue);
+
+                                rowCable.Cells[8].SetCellValue(tempTag);
+                                rowCable.Cells[9].SetCellValue(tempDeck);
+                                rowCable.Cells[10].SetCellValue(tempRoom);
+                                rowCable.Cells[11].SetCellValue(tempName);
+                            }
+                        }
+                        #region 第二个sheet和平行电缆
+                        if (RoutingType)
+                        {
+                            // 在目标工作表中创建新行
+                            IRow newRow = sheetCable2.CreateRow(sheetCable2.LastRowNum + 1); // 将新行添加到目标工作表的末尾
+
+                            // 复制源行的单元格数据到新行
+                            for (int i = 0; i < rowCable.LastCellNum; i++)
+                            {
+                                ICell sourceCell = rowCable.GetCell(i);
+                                ICell newCell = newRow.CreateCell(i);
+
+                                if (sourceCell != null)
+                                {
+                                    newCell.SetCellValue(sourceCell.StringCellValue); // 这里假设你的单元格都包含文本数据
+                                }
+                            }
+                            for (int i = 0; i < rowCable.LastCellNum; i++)
+                            {
+                                rowCable.CreateCell(i).SetCellValue("");
+                            }
+                            curRow--;
+                        }
+                        else
+                        {
+                            TagProp = TagProps.Where(x => x.PropertyName == "平行电缆" && !string.IsNullOrEmpty(x.PropertyValue)).ToList();
+                            PropValue = TagProp.Count() == 0 ? "" : TagProp.Last()?.PropertyValue;
+                            if (!string.IsNullOrEmpty(PropValue))
+                            {
+                                foreach (var pCable in PropValue.Split(','))
+                                {
+                                    // 创建新行
+                                    IRow newRow = sheetCable.CreateRow(curRow++); // 将新行添加到目标工作表的末尾
+
+                                    // 复制源行的单元格数据到新行
+                                    for (int i = 0; i < rowCable.LastCellNum; i++)
+                                    {
+                                        ICell sourceCell = rowCable.GetCell(i);
+                                        ICell newCell = newRow.CreateCell(i);
+
+                                        if (sourceCell != null)
+                                        {
+                                            newCell.SetCellValue(sourceCell.StringCellValue); // 这里假设你的单元格都包含文本数据
+                                        }
+                                    }
+                                    newRow.CreateCell(1).SetCellValue(pCable);
+                                }
+                                Console.Write(PropValue);
+                            }
+                        }
+                        #endregion
+                    }
+                    catch (Exception ex)
+                    {
+                        log4net.LogManager.GetLogger("ERROR").Error("导出电缆清册 - " + ex.Message + ex.StackTrace);
+                        continue;
+                    }
+
+                }
+            }
+            catch (Exception ex)
+            {
+
+                throw ex;
+            }
+        }
+
         #endregion
     }
 }

Learun.Framework.Module/Learun.Application.Module/Learun.Application.TwoDevelopment/ZZDT_EC/GlobalObject.cs

@@ -81,6 +81,7 @@ namespace Learun.Application.TwoDevelopment.ZZDT_EC
         public const string propName_YOff = "纵骨偏移量(mm)";
         public const string propName_TagNumber = "TagNumber";
         public const string propName_Room = "房间号";
+        public const string propName_cableTypeTest = "电缆类型(测试)";
         #endregion
 
         #region projSetting

Learun.Framework.Module/Learun.Application.Module/Learun.Application.TwoDevelopment/ZZDT_EC/ec_drawing_file/ec_drawing_fileBLL.cs

@@ -1017,24 +1017,6 @@ namespace Learun.Application.TwoDevelopment.ZZDT_EC
                                         {
                                             sourceTag.ObjectTypeID = curObjectTypeData.ObjectTypeID;//新的对象类型ID   //会影响sourceTags这个原始集合
 
-                                            //if (curdEngineData != null)
-                                            //{
-                                            //    //位号重复
-                                            //    strEngineDataID = curdEngineData[0].EngineDataID;
-
-                                            //    //删除当前项目的属性数据
-                                            //    listPropByEngineIds.Add(curdEngineData[0].EngineDataID);
-
-                                            //    curdEngineData[0].ObjectTypeID = curObjectTypeID;
-                                            //    curdEngineData[0].UpdateTime = Time.MySqlTime;
-                                            //    curdEngineData[0].UpdateUserID = userInfo.userId;
-                                            //    //更新工程数据表
-                                            //    updateEngineDataList.Add(curdEngineData[0]);
-
-                                            //}
-                                            //else
-                                            //{
-
                                             #region enginedata
                                             //判断当前项目中工程数据是否存在 
                                             ec_enginedataEntity targetTagWithSameName = targetTags.FirstOrDefault(x => x.TagNumber.ToUpper() == sourceTag.TagNumber.ToUpper());
@@ -1441,10 +1423,9 @@ namespace Learun.Application.TwoDevelopment.ZZDT_EC
 
                                     Db.Insertable(addEngineDataList).AS($"ec_enginedata_{targetProject.ProjectIndex}").ExecuteCommand();
                                     Db.Insertable(addPixelList).AS($"ec_enginedata_pixel_{targetProject.ProjectIndex}").ExecuteCommand();
+                                    Db.Ado.ExecuteCommand("SET GLOBAL local_infile = 1;");
                                     //Db.Insertable(addPropertyList).AS($"ec_enginedata_property_{targetProject.ProjectIndex}").ExecuteCommand();
-                                    Db.Fastest<ec_enginedata_propertyEntity>().AS($"ec_enginedata_property_{targetProject.ProjectIndex}")
-                                        .PageSize(10000)
-                                        .BulkCopy(addPropertyList);
+                                    Db.Fastest<ec_enginedata_propertyEntity>().AS($"ec_enginedata_property_{targetProject.ProjectIndex}").PageSize(10000).BulkCopy(addPropertyList);
 
                                     Db.Insertable(addCableList).AS($"ec_cable_{targetProject.ProjectIndex}").ExecuteCommand();
                                     Db.Insertable(addSetList).AS($"ec_Cable_Set_{targetProject.ProjectIndex}").ExecuteCommand();
@@ -1488,7 +1469,7 @@ namespace Learun.Application.TwoDevelopment.ZZDT_EC
 
 
 
-            return "导入结束。";
+            return string.Empty;
         }
 
         /// <summary>

Learun.Framework.Module/Learun.Application.Module/Learun.Application.TwoDevelopment/ZZDT_EC/ec_enginedata_property/ec_enginedata_propertyEntity.cs

@@ -118,6 +118,11 @@ namespace Learun.Application.TwoDevelopment.ZZDT_EC
         /// </summary> 
         [SugarColumn(IsIgnore = true)]
         public string ObjectTypeName { get; set; }
+        /// <summary> 
+        /// 标记是否已使用，布置图自动放置时用
+        /// </summary> 
+        [SugarColumn(IsIgnore = true)]
+        public bool Marker { get; set; }
         #endregion
     }
 }